We imported fine materials of polyamide and other compounds from well-known brands to extrude our monofilaments. Every single line is produced with the insistence of perfection. Started from thinnest diameter 0.05mm up to 5.00mm, we provide nylon monofilament with fairly stable structure. NT Series #10 to #80 are categorized in accordance to different strength levels: #10 is not as high-knot as other series, which is relatively being viewed as economy grade; higher grades represent higher breaking strain. NT80 is so far our strongest grade--0.165mm can pull up to 5.3 LB (Dry Test). NT series is suitable for both mainline and leader material, and for anglers of saltwater and freshwater. Even though original nylon line is a bit too stiff to use, we can change its characteristics through special processing to have the line soft and smoother, control its stretch ratio, and make it sinking faster. Any line can be designed to serve every angler who is with special fishing techniques and habits. Other than altering characteristics of monofilament, we individualize our lines with vivid and durable colors, which can be all customized. We set no boundary to the combination of colors—any unique colors can be created for your niche market! To acquire a complete strength list, please go to get the table you need.
We add special chemicals into copolymer to ameliorate monofilament’s abrasion resistant ability as well as smoothness, so PT Series, AT Series and LT Series are created to serve anglers’ needs of fishing at sharp-edge rugged surface and to increase their casting ability. For the increased smoothness and suppleness of the line, this series can make an angler cast about 10% further. These abrasion resistant series have been greatly used by American, Asian, Australian, European, and South American anglers who do carp fishing and surf casting. Whether fishing at freshwater or saltwater, these lines can act as either a great mainline material or snag leader—these lines works well at not only bottom of ponds and lakes, but also reefs along shore. The three series are different in light penetration, abrasiveness, as well as strength level. PS: Comparison is made only among the functional series.
Line Grade | Strength Level | Abrasion Resistance | Assist Casting | Light Penetration |
PT Series | Average | Average | Best | None |
AT Series | Better | Best | Average | Slightly |
LT Series | Best | Better | Better | Good (Still less than N Series) |
The innovative 3D dot-camouflage pattern was created based on the original high-quality monofilaments, which makes the fishing line colors more diverse and lively. The simulated color design is more consistent with the fishing environment and is more conducive to successful fishing. The 3D spot camouflage pattern can be applied to a variety of line grades. Also there’s a variety of colors for customers to choose from, and even customized for customers.
By using special nylon material, we create a high abrasion resistance stiff monofilament for hooking big fish under various tough situations: No matter you're doing bottom fishing where leaders have to remain rigid and tangle-free, or fishing sharp-toothed predators. Stiff mono is a handy tool for both saltwater and freshwater anglers. For stiffness, anti-friction ability and breaking strain performance, just like fluorocarbon being a great leader material, hard mono can even surpass fluorocabon by colors. Hard mono can be dyed into various colors to create better camouflage illusion to fish, and higher visibility for anglers. We provide different stiffness levels of hard mono for users to get a line combining as many favorable characters as possible: little softness helps tying knots, extremely hard to maintain greatest abrasion resistance. Please contact with us for more details.
HT series is a hollow mono which floats. There are seven air tunnels in the line: a tiny round one at the center and six teardrop-shape tunnels around, making the line remain perfectly round without being flatted easily. These tunnels deflect lights, making the line invisible under water, which is perfect for hooklink material. While having HT series as hooklink, it can form a perfect arch between the lead and the hook that decreases possibility of tangling the line, and the line allows anglers more sensitivity to fish bites for it is perpendicular to the mainline. These benefits qualify HT series for being a handy tool for surface fishing as well.
XT series is innovated from traditional cylinder line. Its hexagonal structure makes the line stays with original shape memory, which prevent line from twisting into itself. For this special structure deflects lights, XT series seems relatively lusterless when it is spooled on bulk. So its presentation is very different from regular monofilament and cannot be parallel winding.
Skinned Hooklink
Leadcore VS Lead-free Leader
Sinking Leader
Anti-friction Shock Leader
high abrasion resistant coating
round-woven PE core
easy to skin and knot
soft and stiff skin coating version for choice
classical lead core or other metal core for choice
more environmental friendly
lead-free leader with high density is a good substitute
flexibly adjust the line's sinking performance
supple and smooth touch
can be customized as per request
a powerful leader
superior strong
high anti-abrasion
color and texture can be uniquely designed